Starting after 180 grit sandpaper. Very aggressive compound, used in place of Luxi Grey to give more aggression Can be used on SPLIT LAP wheels for FLAT pieces, on Sisal buffs after 180 grit sandpaper for Stainless steel. and is perfect for extra strarch removal using Cotton buffs for Platinum & Titanium. Best results using 150 mm diameter buffs running @3000 rpm.
1st stage - 150 mm dia Cotton stitched buff Non treated buff
150 mm dia SPLIT LAP wheel made from 100% wool run @ 3,000 rpm
Specials for Plastics, Veneers, Acrylics & soft non precious metals
1st stage for Plastics, Veneers, Acrylics, Brass, Aluminum, soft metals polishing
range of compounds
|
|
iClean
Cleaning Concentrate which removes used polishing compound in a Ultrasonic cleaner. Will also work well in preheated systems.
iClean is an alkali based liquid for removing small traces of polishing compounds after processing main metals and alloys, such as, steel, copper, zinc, brass, silver and gold. Not for use for cleaning titanium, aluminum and magnesium.
iClean is fast and effective and it does not affect or oxidize the polished metal surface. Ideal for Ultrasonic baths, heated to 50C. It should be diluted with water 1:10.
iClean works a long time without losing it’s cleaning properties. You can add more concentrate to refresh the solution.
ONE PROCESS compounds
Removing material & final lustre in ONE process, using One compound & Non Treated Buff.
Degree of cut: 10 (high)Brightness: 6 (medium to high)
Black
Degree of cut - 9 (very high)Brightness - 7 (medium to high)
Grey
Starting after 180 grit sandpaper
Aggressive compound. Can be used on Sisal buffs after180 grit sandpaper for Stainless steel. Perfect for Platinum for 1st stage scratch removal. Best results using 150 mm sisal buffs running @3000 rpm
Degree of cut: 8 (high)Brightness: 8 (high)
Yellow
Starting after 240-320 grit sandpaper
Aggressive compound for bronze, brass and silver. Perfect for following 240-320 grit sandpaper on stitched cotten buffs. Can be used on polymers also. Best results using 150 mm muslin or felt stitched buffs running @3000 rpm
Degree of cut: 7 (medium to high)Brightness: 8 (high)
Blue
Starting after 320 grit sandpaper
Universal compound for gold, silver, bronze and brass. Can be used for both scratch removal and final lustre in one process from 320 grit sandpaper. Best results using 150 mm cotton or felt stitched buffs running @3000 rpm
Felt solid circle
Use 150 mm dia Sisal buff Non treated buff
150 mm dia Cotton stitched buff Non treated buff
150 mm dia Cotton stitched buff Non treated buff
HIGH LUSTRE Compounds
Degree of cut: 4 (low)Brightness: 9 (high)
Pink
Final polishing compound for platinum and stainless steel.
Ideal as a final high lustre after using LUXI Grey, Yellow or Blue. Use on 150 mm dia loosefold DG buffs @ 3000 rpm for best results.
Ideal as a final high lustre after using LUXI Grey, Yellow or Blue. Use on 150 mm dia loosefold DG buffs @ 3000 rpm for best results.
Degree of cut: 3 (low)Brightness: 10 (high)
Red
The same colour as traditional “Red Rouge”, but made with all LUXI water based compound materials. Ideal for final high lustering for gold and silver, using 150 mm loosefold buffs @ 3000 rpm.
Degree of cut: 3 (low)Brightness: 10 (high)
Super Fine White
Ideal for a highly lustered finish for gold and silver. Use Luxol 150 mm dia loosefold buffs working @ 3000 rpm for best results. The best LUXI compound for use after using LUXI yellow or blue.
Degree of cut: 2 (very low)Brightness: 10 + (very high)
Orange
Luxi Orange compound is ideal for producing very bright and clean colouring of gold and silver,and perfect for pre electro-plating, using Luxol 150 mm dia loosefold buffs working @3000 rpm. The top quality final lustre compound in the LUXI range.
150 mm dia Loosefold DG buff Non treated buff
150 mm dia Loosefold DG buff Non treated buff
150 mm dia Loosefold Luxol buff Non treated buff
150 mm dia Loosefold Luxol buff Non treated buff
SPECIALS for Jewellery polishing
Degree of cut: 7(medium to high)Brightness: 8 (high)
Purple
Low temperature low speed compound for Bristle brush wheels Designed for use on bristle brush wheels mounted on power tools.working a low speeds, to polish intricate surfaces after 400-600 grit sandpaper. For use with all jewellery alloys for surface scratch removal.
Degree of cut: 7 (medium to high)Brightness: 8 (high)
Green
Low temperature low speed compound
Compound for lower RPM’s. Perfect for polishing platinum and titanium at 800-1000 rpm without “orange peel”. The best choice for hand polishing, polishing of intricate surfaces with felt tips and powertools. Compound compares to scratch removal as per 240 grit sandpaper if used on sisal buff. Also will give high lustre if used with 100mm dia loosefold flannel buffs.
Degree of cut: 7 (medium to high)Brightness: 6 (high)
Brown
For polishing 1st stage scratch removal of plastics, veneers, acrylics, and for 1st stage scratch removal and 2nd stage lustering of “soft”metals such as brass, aluminum etc
For best results, 1st stage scratch removal use a calico 150 mm diameter stitched buff, and for 2nd stage lustre use a calico loosefold buff running @3000 rpm
For best results, 1st stage scratch removal use a calico 150 mm diameter stitched buff, and for 2nd stage lustre use a calico loosefold buff running @3000 rpm
Degree of cut: 1 (low)Brightness: 8 (high)
Beige
For use on plastic, veneer and acrylic surfaces. 2nd stage Lustre process
Best results using 150 mm cotton loosefold buffs running @1000 rpm
Best results using 150 mm cotton loosefold buffs running @1000 rpm
Very high aggression. Radial Bristle Brush
Powertool & hand polishing with cotten string, using LUXI Green
1st stage - 150 mm dia Cotton stitched buff, Non treated buff
2nd stage lustre - 150 mm dia Loosefold Luxol buff, Non treated buff
2nd stage lustre - 150 mm dia Loosefold Luxol buff, Non treated buff
150 mm dia Cotton Loosefold buff, Non treated buff
LUXI compounds are designed to stay active on buffs for longer, working at lower temperatures than traditional compounds, allowing a operators to reduce the number of processes to an absolute minimum. In many cases only one process is requried for scratch removal and final lustre. Compounds are very clean to use and non harmful to operators. Luxi will reduce overall polishing costs, and improve the final quality result. Luxi is the comprehensive polishing solution for all polishing of precious and non precious metals.